Sanyo Cordless Telephone CLT 3602 User Guide

USER' S MANUAL  
Base  
n Last Number Redial  
n Charging Handset  
MENU/R  
C/  
MENU/R  
C/  
Digital Cordless Telephone  
1. Press the  
key in standby mode.  
Use Redial Book options  
!
Important Note: Before initial operation, YOU SHOULD FULLY  
CHARGE THE HANDSET for about 15 hours.  
Result: The LCD displays the last number you  
Using the redial book options, you can add a  
number to phone book or delete a number in  
the redial book.  
MODEL NO. CLT-3602  
dialed.  
To charge the handset, you should place it on the base or charger.  
2. Press the  
key to dial out the number.  
Result: When you place the handset on the base or charger, the  
1. Press the  
key.  
handset automatically turns on.  
Your phone allows you to retrieve the last 10  
numbers you have dialed and recall them  
quickly.  
2. Scroll to the desired number by using the  
or key.  
Phone  
Line Jack  
Power Jack  
Charge pins  
n Turning Handset On/Off  
3. When the number appears on the display,  
MENU/R  
Search for and dial  
Redial Book  
a
number in  
press the  
option:  
key to choose the desired  
If the handset is in power off mode, when you  
place the handset on the base or charger, it  
automatically turns on. To turn the handset  
on or off in standby mode, follow these steps:  
If the handset is successful in finding a base, the  
handset will enter the standby mode, the display  
will show handset number or the handset name  
(if you have one saved as described on par. HS  
Name), signal icon, battery icon and current  
time. If the handset is unsuccessful in finding a  
base, the handset will behave according to the  
Out of Range condition.  
ADD TO PB: allows you to add the number to the  
1. Press the  
key in standby mode.  
Page button  
phone book. Complete storing the entry by starting  
from step  
4
described in par."Adding the Phone  
2. If you want to scroll through the memory,  
press or key repeatedly until you  
find out the number you want to dial.  
1. To turn on the handset when it's off, press  
Book Entries" (obviously, you will find the number  
already entered in the appropriate field).  
DELETE: allows you to delete the selected number.  
DELETE ALL: allows you to delete the whole redial  
book.  
and hold the  
key until you switch the  
Charger  
display on. On power up, the handset will  
enter subscription mode and search for a  
3. Press the  
key to dial out the number.  
n Keys Description  
registered base.  
A
message as shown  
Note:  
C/  
below will be displayed to the user, and the  
signal icon will flash.  
4. To exit, press the  
key.  
When battery power is very low, if you  
place the handset on the base, the display  
will show as below. YOU SHOULD FULLY  
CHARGE THE HANDSET BEFORE USING.  
Notes:  
Dial/Speaker key  
Make/Answer a call.  
Activates the speakerphone if pressed during a call.  
If no numbers are found, "EMPTY" is  
displayed.  
Note:  
At step 3, when you select DELETE or  
DELETE ALL options, message  
When the redial book is full, each time you  
dial a new number, the oldest number stored  
in the redial book is automatically erased.  
searching  
a
End/Power key  
End a call.  
"CONFIRM ?" will further ask you to  
MENU/R  
confirm the deletion. To confirm press  
2. To turn off the handset, keep the  
pressed until the display disappears.  
key  
Long press to activate power on/off, as described in par. Turning Handset  
On/Off.  
n Congratulations  
----  
C/  
Key, to escape press the  
Kk  
key.  
on purchasing our high quality product.  
Navigation key:  
Please read the manual carefully to find out all features and how your telephone works, so you can get  
the best out of your new phone.  
n CID Book  
Up/CID key  
Scroll up through lists and menu options.  
Increase the earpiece/speakerphone volume during a call.  
Enter the CID book, as described in par. CID Book.  
MENU/R  
When you receive  
a
call, if the caller's  
4. Press the  
the name.  
key, you are prompted to enter  
Basic Functions  
information is transmitted from the network on  
which the call was made (and the caller doesn't  
hide it), the caller's phone number is displayed.  
Moreover, if you missed one or more calls, the  
icon will appear on the LCD. If the CID  
n Safety Precautions  
MENU/R  
5. Enter the name and press the  
key, then you  
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to  
Down/Phonebook key  
can modify the number you want to store.  
To reduce the risk of electrical shock and injury, please follow these basic safety precautions before  
using the phone.  
Scroll down through lists and menu options.  
Decrease the earpiece/speakerphone volume during a call.  
Enter the Phonebook, as described in par. Phone Book.  
standby mode by pressing the  
key.  
MENU/R  
6. Press the  
key, you are able to select the  
memory is full, the  
icon will flash on the LCD.  
1. Carefully read and observe the instructions in this manual.  
2. Follow all warnings marked on the unit.  
ring tone from Melody 1 to Melody 10, press  
MENU/R  
n Making a Call  
OUT OF AREA - This message will display when  
someone calls from an area where the telephone  
company is not offering the caller identification  
services or is not yet providing number delivery  
to your area.  
the  
key to confirm and exit, you will hear a  
INT key  
confirm beep.  
Set up an internal call to another handset.  
Transfer an incoming call to another handset.  
Set up a conference call with an external line and an internal handset.  
3. When cleaning, unplug the phone first, then use a damp cloth to wipe. Do not use liquid or aerosol  
cleaners.  
You can enter the desired phone number in  
standby mode, which allows you to make  
corrections before dialing. Follow these steps:  
1. Pick up the handset and press the  
key.  
Delete a number in the CID Book  
4. Do not place objects on the line cord that may cause damage.  
Result: The icon appears on the LCD.  
MENU/R  
1. Press the  
key.  
Redial key  
5. Do not use this phone in wet surroundings or environments where there is a risk of explosion.  
6. Avoid spilling of any liquid on the phone.  
1. Enter a telephone number (up to 32 digits).  
PRIVATE - If the caller has exercised the option  
to prevent his name and number from being sent,  
the message will show on the LCD.  
2. Dial a telephone number.  
Enter the redial book, as described in par. Last Number Redial.  
Insert a pause when pre-dialing a number.  
MENU/R  
2. Press the  
key again to choose CID BOOK,  
Check it. You can also use the  
insert a pause.  
key to  
and if available, the numbers are displayed.  
3. To end the call, either press the  
or replace the handset on the base.  
key  
7. Unplug this phone from the wall outlet and refer servicing to qualified service personnel only.  
Menu/OK key (left)  
3. Scroll to the number you want to delete by  
8. Pay attention to the polarity of the batteries, insert the rechargeable batteries in accordance with  
polarity symbols (this instruction is found in the installing batteries section.)  
View and dial any of the CID numbers  
Note:  
MENU/R  
Enter the menu functions in standby mode.  
Confirm selections & actions.  
Performs "Flash" function.  
using  
or  
key.  
If you make  
a
mistake while entering  
C/  
a
Note:  
MENU/R  
1. Press the  
key.  
9. Use only the batteries indicated in the User's Manual. Never use other ordinary batteries or  
conventional alkaline batteries. Otherwise this may not only cause personal injuries but also damage  
to the unit.  
number, press the  
digit.  
key to clear the last  
To make a call to the last number you dialed,  
use the Redial feature. For details, see par.  
Last Number Redial.  
4. When the desired number appears on the  
MENU/R  
MENU/R  
display, press the  
key.  
2. Press the  
key again to choose the CID  
Cancel/Mute key (right)  
BOOK, and if available, the numbers are  
Return to the previous menu.  
Enter to mute during a call.  
Delete an incorrect character/digit.  
C/  
displayed. (You can also access the CID book  
10. Do not mix exhausted batteries with full batteries. Exhausted batteries shall not be disposed of with  
the usual household waste or in a fire.  
2. When the number appears correctly, press  
the key.  
5. Use  
the  
or  
key to choose DELETE, press  
directly by pressing the  
mode.)  
key in standby  
MENU/R  
key. The display will show "CONFIRM  
MENU/R  
?". Press the  
key to confirm, you will hear a  
11. If you are sure you will not be going to use the handset over a month, please take out the batteries  
from the battery compartment.  
key  
beep and the LCD shows the next number.  
n Receiving a Call  
3. Use  
or  
key to view the numbers, you  
key. You  
Press and hold to turn on/off keypad lock function.  
Set up a conference call, as described in par. Calling with more than one  
Handset.  
can make a call by a press of the  
12. Use only the power supply indicated in the User's Manual.  
13. Keep the phone out of the reach of children.  
can also add the entry to the phonebook.  
Delete all numbers in the CID Book  
When a new call is received, the call information  
will appear.  
Result: After you hang up, the LCD displays  
the call duration.  
MENU/R  
1. Press the  
key.  
Add CID Number to Phone Book  
14. Use the phone only in the described manner.  
15. Stop using the phone if it becomes damaged.  
If the caller can be identified, the caller's phone  
number is displayed.  
MENU/R  
2. Press the  
key again to choose CID BOOK,  
Notes:  
MENU/R  
n LCD Window Icons Description  
1. Press the  
2. Press the  
key.  
and if available, the numbers are displayed.  
You can select the ringer volume by using  
MENU/R  
MENU/R  
key again to choose the CID  
or  
key when the phone rings with  
1. To answer the call, press the  
key. If you  
3. Press the  
key and use  
or  
key to  
n Unpacking  
New Call  
Signal Icon  
BOOK, and if available, the numbers are  
an incoming call.  
have activated the Auto Answer function,  
when the handset is on the base, simply lift it  
up to answer.  
choose DELETE ALL menu, then press the  
MENU/R  
key.  
Indicates you have missed one  
or more calls.  
Indicates whether the current  
signal exists or not. If the  
handset is too far from the base,  
this icon will blink on the LCD.  
displayed.  
Once you have unpacked your phone, make sure that all the parts shown below are available. If any  
pieces are missing or broken, please promptly call your dealer.  
If the polyphonic ring tone is set, the ring  
tone may continue for 4 seconds after the  
caller's hang-up or after the parallel phone  
had answered the call.  
3. Use  
or  
key to view the numbers. When  
4. The display shows "CONFIRM ?", press the  
MENU/R  
key to confirm.  
the desired number displays on the LCD, press  
MENU/R  
2. To end the call, either press the  
replace the handset on the base.  
key or  
Off Hook  
the  
key to enter ADD TO PB menu.  
Indicates the line is engaged.  
Result: You hear  
a
beep and the phone  
MENU/R  
C/  
Keypad Lock  
returns to the standby mode after  
clearing all the CID numbers.  
Hands-free  
This icon appears when the  
keypad is locked.  
n Muting the Microphone  
Indicates the handsfree function  
is enabled.  
n Key Lock  
C/  
During a conversation, you can temporarily switch  
your phone's microphone off, so that the other  
party cannot hear you.  
To mute your microphone, press the  
during the conversation. The "CALL MUTED"  
appears on the LCD.  
key  
If you turn on this feature, all keys will be locked.  
To unlock the keys, keep the  
key pressed again  
Base  
Charger  
2 Handsets  
User's manual  
You can answer calls by using the  
key. But  
till the key lock icon  
disappears from the display.  
Battery Icon  
when you hang up, the phone returns to the  
locked mode. This feature is useful to avoid  
pressing keys by mistake.  
Indicates battery charge level.  
Warranty card  
C/  
To unmute the microphone, press the  
key  
Example: You want to say something to another  
person in the room but do not want  
the other party to hear you.  
Note:  
again. You will restore the normal condition.  
In locked mode, if you press any key, the  
phone will generate a warning tone, and the  
"HS LOCKED" message will be redisplayed.  
n Connecting Lines  
To lock the keys, in the standby mode just keep  
4 AAA Ni-MH  
batteries  
2 Adapters*  
Line cord*  
Warranty card  
the  
key pressed till the display shows "HS  
icon.  
To AC wall  
outlet  
1. Connect one end of the phone line cord to the phone  
LOCKED" and the  
line jack of the base, and the other end to  
standard phone wall outlet.  
a
n Adjusting Audio Volume  
*The shape of the plugs can vary according to each country’s specification.  
During a conversation, you can use the  
or  
You can also select the earpiece volume or the  
speaker volume by the AUDIO SETUP in Menu  
under HS SETTING, as described in par. HS  
Settings.  
n Selecting a Language  
2. Connect the modular ends of the AC power adapters  
to the power jack of the base and charger, then plug  
the AC adapter into standard AC wall outlets.  
To phone wall outlet  
key to adjust the level of the earpiece (or  
the handsfree speakerphone one, if activated)  
volume from VOL1 to VOL5. The selected  
volume will be displayed on the LCD.  
n Phone Layout and Keys Function  
The handset supports multiple predefined  
languages. You can change the language used  
to display the menu messages.  
3. Use  
or  
key to choose the LANGUAGE,  
To AC wall  
outlet  
MENU/R  
then press the  
key.  
Handset  
4. The languages will be displayed. Use  
or  
n Installing Batteries  
MENU/R  
1. Press the  
2. Press  
key.  
key repeatedly to choose HS  
key to scroll through the options. Each  
language will be displayed in its own native  
translation.  
Earpiece  
n Ringer Setting  
The rechargeable Ni-MH batteries (AAA size) come with  
your phone. Install the battery before using your  
phone.  
or  
MENU/R  
SETTING, press the  
key.  
You can select your own external (from the  
telephone Network) or internal (from other  
handsets registered to the same base) ring tone  
and adjust the volume.  
5. Press  
or  
key to choose MELODY or  
MENU/R  
5. Press the  
key to select the required  
MENU/R  
Menu/OK key  
Display  
VOLUME, press the  
key.  
language and you will hear a confirm beep.  
Up/CID key  
1. Slide the battery cover in the direction of the  
arrow and pull it out.  
Result: You can select the ring tone from  
Melody 1 to 10 or adjust the volume  
from Volume 1 to 5, or off. When you  
adjust the ring tone or volume, the  
phone plays the selected melody or  
sounds the selected loudness.  
Speaker  
Cancel/Mute key  
Right/Redial key  
MENU/R  
C/  
n HS Name  
Left/Int key  
MENU/R  
1. Press the  
key.  
"HS N" is the default name of the handset after  
registration of handset. The handset number N=  
1 to 5 reflects the handset is the Nth handset,  
which is registered to the base. The HS Label is  
displayed in the standby mode. You can modify it  
by the following steps:  
3. Use  
or  
key to choose HS LABEL, then  
key.  
2. Insert new batteries as indicated, matching  
correct polarity (+,-).  
Down  
MENU/R  
press the  
/Phonebook key  
Dial/Speaker key  
Notes:  
2. Press  
or  
key repeatedly to choose HS  
Battery  
compartment  
cover  
MENU/R  
Reversing the orientation may damage  
the handset.  
SETTING menu, then press the  
key.  
End key  
key  
4. You can enter the handset name (up to  
6
3. To replace the battery  
cover, slide the cover up  
until it snaps in place.  
Alphanumeric  
keys  
characters) by using the alphanumeric keys  
3. Press  
or  
key to choose RING SETUP,  
MENU/R  
The batteries need to be replaced if  
they do not recover their full storage  
capacities after recharging.  
6. Press the  
key to confirm.  
C/  
(use the  
key to delete the previous  
MENU/R  
and press the  
key.  
MENU/R  
character if necessary), then press  
key to  
MENU/R  
key  
1. Press the  
2. Press  
key.  
confirm and exit. The handset name will be  
modified.  
4. Use  
or  
key to choose INT RING/EXT  
When replacing the batteries, always  
use good quality Ni-MH re-chargeable  
batteries. Never use other batteries or  
conventional alkaline batteries.  
MENU/R  
or  
key repeatedly to choose HS  
MENU/R  
RING, press the  
key.  
SETTING, press the  
key.  
Microphone  
Charging contacts  
 

PYLE Audio TV Mount PSWLE55 User Guide
RCA CRT Television F36688 User Guide
Renesas Network Card HS7339KCU01HE User Guide
Rival Rice Cooker FSD201 User Guide
Runco Projection Television MBX 1 User Guide
Runco Projection Television VX 33I User Guide
Sakar Digital Camera 57482 User Guide
Salton Coffee Grinder MEGIWKIT User Guide
Salton Coffeemaker FC 1205 User Guide
Samsung Cell Phone T959 User Guide