Renesas Computer Hardware M30263T 42SSB User Guide

M30263T-42SSB  
Converter Board for 42-pin 0.8-mm-pitch SSOP  
User’s Manual  
Keep safety first in your circuit designs!  
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products  
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to  
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with  
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention  
against any malfunction or mishap.  
Notes regarding these materials  
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited  
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to  
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.  
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of  
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application  
examples contained in these materials.  
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information  
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and  
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that  
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product  
distributor for the latest product information before purchasing a product listed herein. The information described here may contain  
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no  
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information  
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home  
page (http://www.renesas.com).  
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and  
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the  
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any  
damage, liability or other loss resulting from the information contained herein.  
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under  
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions  
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any  
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.  
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or  
reproduce in whole or in part these materials.  
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from  
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport  
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.  
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the  
products contained therein.  
Precautions to be taken when using this product  
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your  
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing  
integration test, evaluation, or some experiment else.  
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.  
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.  
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any  
circumstances.  
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not  
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when  
used in Japan.  
If the requirements shown in the "CAUTION" sentences are ignored,  
the equipment may cause personal injury or damage to the products.  
CAUTION  
Renesas Tools Homepage http://www.renesas.com/en/tools  
Rev.1.00  
August 16, 2004  
( 1/4 )  
REJ10J0411-0100Z  
 
5. External Dimensions of the M30263T-42SSB (See Figure 3)  
35.0  
Unit: mm  
Figure 3 External Dimensions of the M30263T-42SSB  
6. External Dimensions of the M3T-SSOP42B-450 (See Figure 4)  
HD  
HD  
D
D
Symbol  
A
b
Dimension [mm]  
A
A
4.2  
0.3  
D
E
e
HD  
8.4  
17.5  
0.8  
1
42  
1
50  
26  
12.4  
1
50  
Upper connector J1:  
AXK5S50045P  
(made by Matsushita Electric Works, Ltd.)  
J1  
25  
21  
22  
25  
26  
Board  
Pin  
Material : Glass epoxy board  
Material : Bronze phosphide  
Plating :  
Solder plating  
Upper connector Material : Heat tolerant regin (body)  
: Pin No. of the M3T-SSOP42B-450  
: Pin No. of the upper connector  
(J1)  
Copper alloy (post, contact)  
Nickel-based gold plating  
Plating :  
Figure 4 External Dimensions of the M3T-SSOP42B-450  
( 3/4 )  
 
7. Target Foot Pattern (See Figure 5)  
±0.1  
16.00  
+0.1  
0
±0.05  
±0.05  
±0.05  
0.40  
0.28  
0.20  
0.80  
0.80  
Unit: mm  
Figure 5 Dimensions of the target foot pattern (Quoted from the specifications of IC socket for SSOP by Matsushita Electric Works, Ltd.)  
8. Precautions  
CAUTION  
Cautions to Be Taken for This Product:  
z Do not pull or excessively flex the cable. The cable may cause a break.  
z Do not solder the M3T-SSOP42B-450 directly on the target. Use the included socket.  
z When attaching the M3T-SSOP42B-450, be sure to confirm the pin positions.  
z When soldering the socket's body and mounting the M3T-SSOP42B-450, refer to the supplementary document  
"Mounting the Socket Included with the M3T-SSOP42B-450" and "Notes on Handling M3T-SSOP42B-450".  
z Do not apply an unnecessary stress to the M3T-SSOP42B-450.  
z Do not touch the pins of the M3T-SSOP42B-450.  
z Store this product in the dedicated case.  
IMPORTANT  
Notes on This Product:  
z We cannot accept any request for repair.  
z To remove the socket frame, use the dedicated tool AXY89404201* (made by Matsushita Electric Works, Ltd.).  
* To purchase this product and socket frame for repair, contact Matsushita Electric Works, Ltd.  
z For inquiries about the product or the contents of this manual, contact your local distributor.  
( 4/4 )  
 

RCA Telephone Accessories TP231N User Guide
Remington Hair Dryer V 2002 User Guide
Roland DJ Equipment RSS 10 User Guide
Rosen Entertainment Systems DVD Player R5505 User Guide
Ryobi Drill HP1830M User Guide
Samsung DVR SDE 400X User Guide
Samsung Printer CLX 8380 User Guide
Sanyo Battery Charger Twicell User Guide
Savin Printer 3799 User Guide
Sennheiser Bluetooth Headset FLX 70 User Guide