Raymarine TV Mount E46034 User Guide

E46034 Flush Mounting Kit  
for Ray48 & Ray54/E  
5583-002 Flush Mount Assembly  
Bracket Subassembly, qty 2  
Gasket, 1 ea, Ray48 & Ray54/E  
Screw, M6, qty 2, and  
Lock Washer, M6, qty 2  
RAY48  
RAY54  
1. Use template to cut out required opening in console.  
2. Remove appropriate Gasket from pre-punched sheet  
and place on radio, behind front fascia.  
3. Insert unit into cutout in console.  
4. Attach both Bracket Subassemblies to radio using M6  
Screws and Lock Washers.  
5. Tighten Bracket Subassembly mounting screws until  
unit snugly attached to console.  
Pre-punched gaskets sheet  
172 mm (6.8") ALLOWANCE FOR FLUSH MOUNT KIT  
135 mm (5.3") CUTOUT  
8.5 mm (.33")  
10 mm (.4")  
Ray48 Mounting Template  
51 mm (2")  
CUTOUT  
70 mm  
(2.75")  
CUT OUT SHADED AREA  
9 mm (.4")  
18.5 mm  
(.73")  
ALLOW 110 mm (4.3") FROM RADIO MOUNTING SURFACE FOR RADIO DEPTH.  
190 mm (7.5") ALLOWANCE FOR FLUSH MOUNT KIT  
150 mm (5.9") CUTOUT  
8 mm (.3")  
8 mm (.3")  
61 mm  
(2.4")  
CUTOUT  
Ray54/E Mounting Template  
79 mm (3.1")  
CUT OUT SHADED AREA  
10 mm (.4")  
167 mm (6.6")  
20 mm  
(.8")  
3033-010  
 

Radio Shack Cordless Telephone ET 916 User Guide
Ratoc Systems Network Card REX SMA01F User Guide
Renesas Computer Hardware H8S 2168 User Guide
Rosewill Webcam RIWC 11001 User Guide
Samson Headphones SP50P User Guide
Samsung Bluetooth Headset CBAAG 00036 User Guide
Samsung Printer SCX 4500 User Guide
Samsung Refrigerator DA68 01812G User Guide
Samsung Stereo System HW C900 User Guide
Schumacher Automobile Battery Charger SE 3522 User Guide