Radio Shack Washer 49 2533 User Guide

49-2533  
4-channel surveillance  
controller  
You can power the controller using the supplied 15V, 850mA AC/DC adapter.  
You can set the PIR mode, alarm, scan time, alarm time,  
dwell time, remote learn, and clock’s date and time on  
the menu using the TV/monitor’s display.  
Always connect the adapter to your controller before you connect it to AC power. When you finish,  
disconnect the adapter from AC power before you disconnect it from the controller.  
Notes  
Turn on the TV/monitor and set it to the video mode (or  
the VCR’s RF output channel). Then, set the VCR to the  
Audio/Video input mode.  
The AUTO/MANUAL indicator lights when you power the controller. The unit automatically enters the auto-  
scan mode and sounds two beeps after you complete the connection.  
Connect your cameras’ mini-DIN plugs into the mini-DIN sockets CAM1, CAM2, CAM3, and/or CAM4 on the back of the  
Press and hold 6/AUTO/MANUAL/NEXT for about  
two seconds. The controller beeps and the setup  
menu appears on the TV/monitor’s display.  
controller.  
Connect the yellow stereo phono plug at one end of the supplied 6-foot connector cable to the video input jack of your  
Repeatedly press 6/AUTO/MANUAL/NEXT to  
select the row you want to set.  
VCR, and connect the white stereo phono plug of the cable to the audio input jack of your VCR.  
Connect the yellow stereo phono plug at the other end of the connector cable to VIDEO on the back of the controller,  
Repeatedly press 4/CAM/SELECT/SELECT to  
and connect the white stereo phono plug to AUDIO on the back of the controller.  
select one function of the row you want to set.  
Repeatedly press /VCR/SET to set the function.  
Plug the supplied IR cable to IR REM jack on the back of the controller and lead the IR cable to the front of the VCR at a  
distance of 5 to 30 cm. Make sure the IR transmitter is directly pointing to the VCR’s sensor.  
Repeatedly press 6/AUTO/MANUAL/NEXT to  
select Exit and press /VCR/SET to exit the menu  
after you complete the setting.  
Thank you for purchasing your 4-Channel Surveillance  
Controller from RadioShack. Your controller lets you  
use as many as four indoor/ourdoor security cameras, a  
TV or monitor, and your VCR (none supplied) as a fully  
functional surveillance system. It is designed to provide  
black and white or color camera observation systems at  
your home or workplace. And, you can even set up the  
controller so the VCR records only when the cameras  
detect motion using the PIR (passive infrared) feature.  
Connect the supplied 15V AC adapter into the DC 15V jack on the back of the controller.  
Then, connect it to a standard AC outlet.  
You must use a Class 2 power source that supplies regulated 15V DC and delivers at least 850 mA. Its center  
tip must be set to positive and its plug must fit the controller’s DC15V jack. The supplied adapter meets these  
specifications. Using an adapter that does not meet these specifications could damage the controller or the  
Caution  
adapter.  
Its features include:  
4-Channel Input of Camera – lets you connect up to  
4 cameras to the controller.  
On-Screen Setup – lets you set the PIR, alarm, scan  
time, alarm time, dwell time, remote learn, and  
clock’s date and time on the menu using the TV/  
monitor’s display.  
Mini-DIN plugs  
/VCR/SET  
6/AUTO/  
MANUAL/NEXT  
Automatic VCR Record – automatically actives  
when PIR has been triggered.  
4/CAM/SELECT/  
6-foot connector cable  
SELECT  
Intercom Function – enables 2-way communication  
between cameras and your controller (through TV/  
monitor speaker).  
Turning the PIR Sensor On/Off  
You can turn the PIR sensor on the camera on or off. If  
you are going to use the system as surveillance only,  
you might want to turn the PIR sensor function off.  
PIR  
Auto and Manual Scan Function – automatically  
scans and displays each channel after you power  
the controller each time, and you also can scan the  
channels manually.  
Repeatedly press NEXT to select PIR and press SELECT  
to select ON or OFF. Then press SET to enter the setting  
into the controller’s memory.  
IR Cable  
Inline Audio Buzzer Warning – activates the buzzer  
when the unit is triggered if you set the alarm on.  
Proceed to other menu setting, or repeatedly press  
NEXT to select Exit and exit the menu mode.  
Rear view of controller  
NO/COM/NC  
Turning the Alarm On/Off  
IR REM  
The controller's built-in alarm sounds when a camera’s  
PIR sensor is triggered. You might want to turn the built-  
in alarm off when you connect the other alarm device to  
the controller.  
DC 15V  
4-Channel Controller  
6-foot connector cable  
IR (infrared) cable  
15V AC adapter  
VIDEO  
Repeatedly press NEXT to select Alarm. Then, press  
SET to enter the setting into the controller's memory.  
Mini-DIN sockets for  
AUDIO  
cameras  
Proceed to other menu setting, or repeatedly press  
NEXT to select Exit and exit the menu mode.  
Please read this user’s guide before  
installing, setting up and using your new product  
 

RCA Car Video System DRC6389T User Guide
RCA DVD Player 7L400MDV User Guide
ResMed Network Router 248127 User Guide
Rikaline GPS Receiver GPS 6020 User Guide
RoboteQ Computer Hardware AX500 User Guide
Rotel CD Player RCD 1072 User Guide
Samsung Camcorder HMX QF20 User Guide
Sanyo Projector PLC WXU10N User Guide
Saturn Automobile 2007 Vue User Guide
Sears Oven 91141369 User Guide