Radio Shack Telephone HandsfreePhone withCallerID CallWaiting User Guide

Owner’s Manual  
Please read before using this equipment.  
 
ˆ Features  
60 Memory Caller ID  
up to 60 names and numbers.  
Your RadioShack Handsfree  
Phone provides handsfree opera-  
tion using a comfortable light-  
weight headset so your hands are  
free while you talk.  
— stores  
Adjustable Ringer Volume  
lets you choose between two vol-  
umes for the ringer.  
The phone’s Caller ID unit  
records each caller’s telephone  
number (and name, if available in  
your area) and the date and time  
of the call, as provided by your lo-  
cal phone company to Caller ID  
service subscribers. If you sub-  
scribe to Call Waiting with Caller  
ID, the phone can show you the  
incoming caller information, even  
when you are already talking on  
the phone.  
Tone or Pulse Dialing  
— lets  
you use tone or pulse (rotary) di-  
aling and lets you switch from  
pulse to tone dialing for long-  
distance, bank-by-phone, or other  
special services.  
Redial  
— lets you quickly redial  
the last number dialed.  
Flash  
— sends an electronic  
switchhook signal for use with  
special phone services, such as  
Call Waiting.  
Your phone has these features:  
Call Waiting Caller ID  
— dis-  
3-Line Liquid Crystal Display  
lets you view an entire Caller ID  
record on one screen.  
plays information about an incom-  
ing call while you are on the  
phone.  
Belt Clip  
phone on your belt for easy porta-  
bility.  
— lets you carry the  
Callback  
number stored in a Caller ID  
record.  
— lets you quickly dial a  
Hearing-Aid Compatibility  
— al-  
Headset Volume Control  
you adjust the volume you hear  
through the headset.  
— lets  
lows you to use the phone with  
hearing aids that have a T (tele-  
phone) switch.  
© 2000 RadioShack Corporation.  
All Rights Reserved.  
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.  
2
Features  
 
This telephone has been tested  
and found to comply with all appli-  
cable ETL and FCC standards.  
be followed to reduce the risk of  
fire, electrical shock, and/or injury  
to persons including the following:  
• Read and understand all  
instructions,  
WARNING:  
or shock hazard, do not expose this  
product to rain or moisture.  
To reduce the risk of fire  
• Follow all warnings and  
instructions marked on the  
product.  
CAUTION  
RISK OF ELECTRIC  
!
SHOCK. DO NOT OPEN.  
• Do not use liquid cleaners, or  
aerosol cleaners. Use a damp  
cloth for cleaning. If neces-  
sary, use a mild soap.  
CAUTION:  
TO REDUCE THE  
RISK OF ELECTRIC SHOCK, DO  
NOT REMOVE COVER OR BACK.  
NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO  
QUALIFIED PERSONNEL.  
• Do not use this product near  
water, for example near a  
bathtub, wash bowl, kitchen  
sink, or laundry tub, in a wet  
basement, or near a swim-  
ming pool.  
This symbol is intended to  
alert you to the presence of  
uninsulated dangerous volt-  
age within the product’s  
enclosure that might be of  
sufficient magnitude to con-  
• Do not place this product on  
an unstable cart, stand or  
table. The product may fall,  
causing serious damage to  
the product.  
stitute  
a
risk of electric  
shock. Do not open the  
product’s case.  
This symbol is intended to  
inform you that important  
operating and maintenance  
instructions are included in  
the literature accompanying  
this product.  
• Do not allow anything to rest  
on the telephone line cord.  
Do not locate this product  
where the cord will be abused  
by persons walking on it.  
!
IMPORTANT SAFETY  
INSTRUCTIONS  
• Never spill liquid of any kind  
on the product.  
To reduce the risk of electric  
shock, do not disassemble  
When using your phone, basic  
safety precautions should always  
Features  
3
 
this product. If servicing is  
required, take it to a qualified  
serviceman.  
There may be a remote risk of  
electrical shock from light-  
ning.  
• Disconnect this product from  
the telephone line and refer to  
qualified service personnel  
under the following condi-  
tions.  
• Do not use the telephone to  
report a gas leak in the vicin-  
ity of the leak.  
• Use only the batteries indi-  
cated in this manual. Do not  
dispose of batteries in a fire.  
They might explode. Check  
with local codes for possible  
special disposal instructions.  
- If liquid has been spilled into  
the product.  
- If the product has been  
exposed to rain or water.  
SAVE THESE INSTRUC-  
TIONS  
- If the product has been  
dropped or the cabinet has  
been damaged.  
FCC STATEMENT  
- If the product exhibits a dis-  
tinct change in performance.  
This phone complies with Part 68  
of FCC Rules. You must, upon re-  
quest, provide the FCC registra-  
tion number and the REN to your  
phone company. Both numbers  
are on the bottom of the phone.  
- If the product does not oper-  
ate normally by following the  
operating instructions. Adjust  
only those controls, that are  
covered by the operating  
instructions because im-  
proper adjustment of other  
controls may result in dam-  
age and will often require  
extensive work by a qualified  
technician to restore the prod-  
uct to normal operation.  
You must not connect your phone  
to:  
• coin-operated systems  
• party-line systems  
• most electronic key phone  
systems  
• Avoid using  
(other than a cordless type)  
during an electrical storm.  
a
telephone  
This device complies with Part 15  
of the FCC Rules. Operation is  
4
Features  
 
subject to the following two condi-  
tions: (1) this device may not  
cause harmful interference, and  
(2) this device must accept any  
interference received, including  
interference that may cause un-  
desired operation.  
those services through your local  
phone company.  
Where Caller ID is offered, one or  
more options are generally avail-  
able:  
• caller’s number only  
• caller’s name only  
The phone also complies with the  
limits for a Class B device as  
specified in Part 15 of FCC Rules.  
These limits provide reasonable  
protection in a residential area.  
However, your telephone might  
cause TV or radio interference  
even when it is operating proper-  
ly. To eliminate interference, you  
can try one or more of the follow-  
ing corrective measures.  
• caller’s name and number  
READ THIS BEFORE  
INSTALLATION  
We have designed your phone to  
conform to federal regulations,  
and you can connect it to most  
telephone lines. However, each  
phone (and each device, such as  
a telephone or answering ma-  
chine) that you connect to the  
telephone line draws power from  
the telephone line. We refer to  
this power draw as the device's  
ringer equivalence number, or  
REN. The REN is on the back of  
your phone.  
• Reorient or relocate the TV's  
receiving antenna.  
• Increase  
the  
distance  
between the telephone and  
the radio and TV.  
Consult your local RadioShack  
store if the problem still exists.  
If you use more than one phone  
or other device on the line, add up  
all of the RENs. If the total is more  
than five (three in rural areas),  
your telephones might not ring. If  
ringer operation is impaired, re-  
move a device from the line.  
IMPORTANT CALLER  
ID INFORMATION  
To use the phone’s Caller ID and  
Call Waiting with Caller ID fea-  
tures, you must be in an area  
where those services are avail-  
able and you must subscribe to  
Features  
5
 
ˆ A Quick Look at Your Phone  
VOLUME  
(not shown)  
ERASE  
TALK  
CALL BACK/  
FLASH  
REDIAL/  
PAUSE  
ABC  
MUTE  
TONE  
PULSE/  
TONE  
RINGER  
TEL  
6
A Quick Look at Your Phone  
 
ˆ Preparation  
When you press any of the  
phone’s buttons or the phone re-  
INSTALLING THE  
BATTERIES  
ceives  
a
call,  
appears. If  
appears or the display is  
blank when you press a key or re-  
ceive a call, or if the phone stops  
operating properly, replace the  
batteries.  
Your phone requires three AAA  
batteries (not supplied) for power.  
For the best performance and  
longest life, we recommend Ra-  
dioShack alkaline batteries.  
Warning:  
Dispose of old batteries  
Cautions:  
promptly and properly. Do not  
burn or bury them.  
• Use only fresh batteries of the  
required size and recom-  
mended type.  
Caution:  
If you do not plan to use  
the phone for a month or more,  
remove the batteries. Batteries  
can leak chemicals that can de-  
stroy electronic parts.  
• Do not mix old and new bat-  
teries or different types of bat-  
teries (standard or alkaline).  
Follow these steps to install bat-  
teries.  
Note:  
The phone still rings when  
you receive a call, even if the bat-  
tery power is low or you have not  
installed batteries. However, you  
cannot answer the call without  
sufficient battery power.  
1. Use a Phillips screwdriver to  
loosen the screw on the bat-  
tery compartment cover, then  
use a flat screwdriver to pry  
off the cover.  
CONNECTING TO THE  
PHONE LINE  
2. Place the batteries in the  
compartment, as indicated by  
the polarity symbols (+ and –)  
marked inside.  
Your telephone connects directly  
to a modular phone line jack. If  
your phone line jack is not a mod-  
ular jack, you can update the wir-  
ing yourself, using jacks and  
adapters available from your local  
3. Replace the cover.  
Preparation  
7
 
RadioShack store. Or, you can let  
the telephone company update  
the wiring for you.  
4. Hold the headset in place,  
and adjust the microphone  
boom until it is about even  
with your chin. Experiment  
until you find the most com-  
fortable position.  
The USOC number of the jack to  
be installed is RJ11C, or RJ11W  
for a wall plate jack.  
Caution:  
The microphone boom  
Plug one end of the supplied  
swivels on the headset. Do not  
bend the microphone boom while  
you adjust it.  
TEL  
short modular cord into the  
jack on the top of the phone. Then  
plug the other end into the wall  
plate jack.  
SETTING THE  
DIALING MODE  
CONNECTING/  
ADJUSTING THE  
HEADSET  
PULSE/TONE  
Set  
on the top of the  
phone for the type of service you  
have. If you are not sure which  
type you have, do this test.  
Connect the headset’s plug into  
on the bottom of the phone.  
Then follow these steps to adjust  
the headset.  
PULSE/TONE  
TONE  
.
1. Set  
to  
2. Put on the headset and adjust  
it as needed.  
1. Place the headset on your  
head with the earpiece over  
either ear.  
TALK  
3. Press  
and listen for a  
dial tone.  
2. Adjust the headset band until  
it rests with almost no pres-  
sure on your ear and the top  
of your head.  
4. Press any number other than  
0
.
Note:  
If your phone system  
requires that you dial an  
access code (9, for example)  
before you dial an outside  
number, do not dial the  
access code either.  
3. If the headset is loose, adjust  
it inward slightly to tighten it. If  
the headset is tight, gently  
pull the headset band out to  
loosen it.  
If the dial tone stops, you  
have touch-tone service.  
8
Preparation  
 
PULSE/TONE  
Leave  
TONE  
set to  
. If the dial tone contin-  
ues, you have pulse service.  
code (or store it in the memory),  
you can add it afterwards. See  
“Dialing Numbers from a Caller ID  
Record” on Page 13.  
PULSE/TONE  
PULSE  
.
Set  
to  
TALK  
Note:  
If your calling area requires  
5. Press  
to hang up.  
10-digit dialing including area  
code, do not enter the area code  
but leave this option blank.  
SETTING THE  
RINGER VOLUME  
Follow these steps to store your  
area code.  
You can select one of two volume  
RINGER H/L  
settings. Set  
on the top  
of the phone to the desired ringer  
setting (high or low).  
CALL BACK/FLASH  
1. Hold down  
for about 4 seconds.  
2. Enter your three-digit area  
code. If you make a mistake,  
STORING YOUR AREA  
CODE  
REDIAL/PAUSE  
press  
to clear  
the entry, then enter the cor-  
rect code.  
You can store your local area  
code in the phone’s Caller ID  
memory so it does not store the  
area code if the received call is  
from your local area. If for some  
reason you need to dial the area  
CALL BACK/FLASH  
3. Press  
to  
store the area code.  
ˆ Phone Operation  
Before you use the phone, put on  
the headset and adjust it as need-  
ed.  
then dial the number. The number  
appears on the display as you dial  
it.  
Note:  
oappears when you press  
and H appears when you  
MAKING AND  
RECEIVING CALLS  
#
press .  
TALK  
To make a call, press  
. TALK  
appears. Listen for the dial tone,  
Phone Operation  
9
 
TALK  
REDIAL/PAUSE  
. Re-  
To answer a call, press  
.
pause, press  
peatedly press  
longer pause.  
REDIAL/PAUSE  
TALK appears. To end a call,  
for a  
TALK  
press  
again.  
Note:  
PAUSE  
– appears when you press  
.
ADJUSTING THE  
VOLUME  
USING FLASH  
To adjust the volume of the sound  
you hear through the headset dur-  
Flash performs the electronic  
equivalent of a switchhook opera-  
tion for special services, such as  
Call Waiting.  
VOLUME  
ing a call, slide  
on the  
side of the phone until you obtain  
the desired volume level.  
For example, if you have Call  
USING REDIAL  
CALL BACK/FLASH  
Waiting, press  
You can quickly dial the last num-  
to answer an incoming call with-  
out disconnecting the current call.  
TALK  
ber you dialed. Press  
, listen  
for the dial tone, then press  
CALL BACK/FLASH  
Press  
return to the first call.  
again to  
REDIAL/PAUSE  
.
The redial memory can also store  
tone entries (see “Using Tone  
Services on a Pulse Line” on  
Page 11) and pause entries (see  
“Entering a Pause”).  
Note:  
If you do not have any spe-  
cial phone services, pressing  
CALL BACK/FLASH  
might discon-  
nect the current call.  
USING MUTE  
ENTERING A PAUSE  
MUTE  
Press  
to talk to someone  
In some telephone systems, you  
must dial an access code (9, for  
example) and wait for a second  
dial tone before you can dial an  
outside number. You should also  
store a pause after the access  
code to allow the outside line time  
to connect when you redial the  
number. To enter a 2-second  
else in the room without the per-  
son on the other end of the phone  
line hearing your conversation.  
MUTE  
MUTEappears. Press  
again  
to resume your phone conversa-  
tion.  
10  
Phone Operation  
 
2. Dial the service’s main num-  
ber.  
USING TONE  
SERVICES ON A  
PULSE LINE  
3. When the service answers,  
TONE  
press  
. Any additional  
Some special services require  
tone signals (such as bank-by-  
phone). If you have pulse dialing,  
you can still use these special  
tone services by following these  
steps.  
numbers you dial are sent as  
tone signals.  
The phone’s dial mode resets to  
pulse when you make or receive  
a call.  
PULSE/TONE  
1. Be sure  
is set to  
PULSE  
.
ˆ Caller ID Operation  
CALL  
the incoming call, press  
If you subscribe to Caller ID ser-  
vice from your phone company,  
the phone company sends infor-  
mation about the call, as well as  
the time and date, between the  
first and second rings of every call  
you receive.  
BACK/FLASH  
. To resume the previ-  
ous phone conversation, press  
CALL BACK/FLASH  
again.  
If the phone’s Caller ID memory  
becomes full, any new call replac-  
es the oldest call’s record.  
The phone displays this informa-  
tion when it receives a call, and it  
stores up to 60 Caller ID records  
for later review. It also shows if  
caller information is unavailable  
or if the name and number were  
blocked by the caller (see “Caller  
ID Messages” on Page 12).  
REVIEWING CALLER  
ID RECORDS  
To review the Caller ID records,  
repeatedly press or . NEW-  
XX TOTAL-XX appears, show-  
ing the number of new Caller ID  
records, if any, and the total num-  
ber of records appears. Press ▲  
or again, and the latest record  
appears.  
If you subscribe to Call Waiting  
with Caller ID, flashes along  
with the Caller ID record for the  
new call. If you want to answer  
Caller ID Operation  
11  
 
Repeatedly press to scroll  
through the Caller ID records from  
the oldest to the newest, or to  
scroll back through the records.  
You can recall Caller ID informa-  
tion even while you are talking on  
the phone.  
CALLER ID  
MESSAGES  
When you scroll past the last or  
first record, END OF LIST ap-  
pears, then the first or last record.  
Display  
or  
Description  
The top line of each record shows  
the following information:  
Appears when  
the caller has  
blocked Caller ID  
information from  
being sent.  
P
PRIVATE  
• the time and date (MM/DD)  
• whether the number on the  
display is new or already  
reviewed (NEWappears if you  
select a Caller ID record you  
have not reviewed)  
Appears when  
the caller is not  
within a Caller ID  
service area.  
O
or  
OUT OF AREA  
Appears when  
the Caller ID  
information was  
garbled, or when  
there was an  
error during the  
transmission of  
Caller ID infor-  
mation. Occa-  
sional errors are  
normal. If the  
phone fre-  
ERROR  
• whether more than one call  
was received from that num-  
ber (REPEATand the number  
of repeated calls from that  
number appears)  
Note:  
Once you review the  
record, the repeat indication  
does not appear again.  
• the number of the record in  
the Caller ID directory  
quently displays  
ERROR  
, contact  
The second line shows the call-  
er’s phone number, and the third  
line shows the caller’s name.  
your local phone  
company or  
RadioShack  
store.  
Note:  
The display does not show  
&, :, ;, =, or @.  
12  
Caller ID Operation  
 
To stop dialing after the phone  
DIALING NUMBERS  
FROM A CALLER ID  
RECORD  
TALK  
started to dial, press  
again.  
Note:  
If a Caller ID record does  
not contain a phone number (if it  
was blocked by the caller, for ex-  
ample) you cannot dial from that  
record.  
To dial a number stored in a Call-  
er ID record, recall the record,  
CALL BACK/FLASH  
then press  
.
PRESS TALK appears. If the  
area code of the received call is  
the same as the one you stored in  
the phone, the record does not  
show the area code. If it is differ-  
ent, the record shows the area  
code.  
DELETING CALLER ID  
RECORDS  
You can delete Caller ID records  
individually or all at once.  
To delete a single Caller ID  
record, repeatedly press or ▼  
to recall the record you want to  
To dial the number as it appears  
TALK  
on the display, simply press  
.
ERASE  
.
If you need to add the area code  
delete,  
then  
press  
and/or use 1+ dialing, repeatedly ERASE?appears, prompting you  
CALL BACK/FLASH  
press  
until the  
to confirm the deletion. Press  
ERASE  
required number appears.  
again.  
MESSAGE  
ERASED appears, indicating that  
the record was deleted.  
For example, if you stored area  
code 817 into the phone and you  
received a call from 817-555-  
1234, you see the following as  
To delete all Caller ID records,  
ERASE  
hold down  
for about 4 sec-  
CALL BACK/  
you repeatedly press  
onds. ALL ERASE? appears,  
prompting you to confirm the de-  
FLASH  
.
ERASE  
letion. Press  
to delete the  
5551234  
TALK  
records, or press  
, or to  
cancel the deletion.  
18175551234  
8175551234  
15551234  
When you delete all Caller ID  
records, ERASED then NO  
CALLSappears.  
Caller ID Operation  
13  
 
ˆ Troubleshooting  
We do not expect you to have any problems with your phone, but if you  
do, the following suggestions might help.  
Problem  
Possible Solutions  
The phone does not work or  
works poorly.  
• The phone line and handset cords might  
not be securely connected. Reconnect  
them.  
• Batteries are weak or not installed. Install  
or replace the batteries.  
Volume drops or you hear  
unusual sounds.  
Someone has picked up another phone on the  
same line. Hang up the other phone.  
No dial tone.  
The phone line and handset cords might not  
be securely connected. Reconnect them.  
You have an incoming call,  
but do not receive any Caller  
ID information.  
• Let the phone ring twice before you  
answer, so it has time to record the Caller  
ID information.  
• The phone line and handset cords might  
not be securely connected. Reconnect  
them.  
• Check with your phone company to con-  
firm that your Caller ID service is active.  
Display is blank.  
Batteries are weak or not installed. Install or  
replace the batteries.  
If you still have problems, disconnect the phone. If other phones on the  
same line work properly, the fault is in this phone or its installation. If you  
cannot find the problem, take the phone to your local RadioShack store  
for assistance.  
14  
Troubleshooting  
 
ˆ Care  
To enjoy your Handsfree Phone  
for a long time:  
THE FCC WANTS YOU  
TO KNOW  
• Keep the phone dry. If it gets  
wet, wipe it dry immediately.  
In the unlikely event that your  
phone causes problems on the  
phone line, the phone company  
can temporarily discontinue your  
service. If this happens, the  
phone company attempts to notify  
you in advance. If advance notice  
is not practical, the phone compa-  
ny notifies you as soon as possi-  
ble and advises you of your right  
to file a complaint with the FCC.  
• Use and store the phone only  
in normal temperature envi-  
ronments.  
• Handle the phone gently and  
carefully. Do not drop it.  
• Keep the phone away from  
dust and dirt.  
• Wipe the phone with a damp  
cloth occasionally to keep it  
looking new.  
Also, the phone company can  
make changes to its lines, equip-  
ment, operations, or procedures  
that could affect the operation of  
this telephone. The telephone  
company notifies you of these  
changes in advance, so you can  
take the necessary steps to pre-  
vent interruption of your tele-  
phone service.  
Modifying or tampering with the  
can  
phone’s internal components  
cause a malfunction and might in-  
validate its warranty and void your  
FCC authorization to operate it  
. If  
your phone is not performing as it  
should, take it to your local Ra-  
dioShack store for assistance. If  
the trouble is affecting the tele-  
phone lines, the phone company  
can ask you to disconnect your  
phone until you have resolved the  
problem.  
LIGHTNING  
Your telephone has built-in pro-  
tection circuits to reduce the risk  
of damage from surges in tele-  
phone line and power line current.  
These protection circuits meet or  
exceed the FCC requirements.  
Care  
15  
 
However, lightning striking the telephone or power lines can damage  
your telephone.  
Lightning damage is not common. Nevertheless, if you live in an area  
that has severe electrical storms, we suggest that you unplug your  
phone when storms approach to reduce the possibility of damage.  
Limited One-Year Warranty  
This product is warranted by RadioShack against manufacturing defects in material and work-  
manship under normal use for one (1) year from the date of purchase from RadioShack com-  
pany-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS  
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED  
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTIC-  
ULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIM-  
ITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack  
SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PER-  
SON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DI-  
RECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING  
OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY  
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REV-  
ENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or  
limitation of incidental or consequential damages, so the above limitations or exclusions may not  
apply to you.  
In the event of a product defect during the warranty period, take the product and the RadioShack  
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option,  
unless otherwise provided by law: (a) correct the defect by product repair without charge for  
parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the  
purchase price. All replaced parts and products, and products on which a refund is made, be-  
come the property of RadioShack. New or reconditioned parts and products may be used in the  
performance of warranty service. Repaired or replaced parts and products are warranted for the  
remainder of the original warranty period. You will be charged for repair or replacement of the  
product made after the expiration of the warranty period.  
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God,  
abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper in-  
stallation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b)  
any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consum-  
ables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance  
costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state.  
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102  
We Service What We Sell  
12/99  
43-2151  
07A00  
Printed in Korea  
RadioShack Corporation  
Fort Worth, Texas 76102  
 

Pyramid Car Audio Car Stereo System CDR79MP User Guide
Radio Shack Speaker System PRO LS100 User Guide
Rolls Microphone MX124 User Guide
Rosewill Network Card RNX N600UBE User Guide
Rosewill Two Way Radio 21 1826 User Guide
Rotel Radio RT1084 User Guide
Salton Juicer JM1 User Guide
Samsung Car Video System 305TPLUS User Guide
Samsung Cell Phone B2100 User Guide
Samsung Clothes Dryer DV361EWBEWR User Guide