Radio Shack Computer Accessories 26 765 User Guide

26-765  
Your mouse comes with two AAA rechargeable batteries. Additional batteries are available at RadioShack  
27 MHz RF Wireless  
Rechargeable Optical Mouse  
battery notes  
1. Remove the battery  
• It takes about 12-16 hours to fully charge the batteries  
compartment cover on the  
bottom of the mouse. Replace  
when finished.  
for the first time and about 2 hours thereafter.  
• Dispose of old batteries promptly and properly.  
Thank you for purchasing your Wireless  
• Do not burn or bury batteries.  
Rechargeable Optical Mouse from RadioShack. Your  
new mouse operates with digital radio technology.  
You can use the mouse on any computer equipped  
with a USB interface. Your mouse uses radio  
frequencies to send data to the tranceiver, which  
forwards the data to your computer. It can operate  
on one of two channels, CH1 and CH2.  
• Use only fresh batteries of the required size and  
2. Insert batteries as indicated by  
recommended type.  
the polarity symbols (+ and -)  
marked inside the battery  
compartment.  
• Do not mix batteries of different sizes or chemistries.  
• If you do not plan to use your mouse for a week  
or more, remove the batteries. Batteries can leak  
chemicals that can damage electronic parts.  
set the channel  
connect the tranceiver  
Connect the tranceiver’s cable to the USB port  
on your computer, or use the PS/2 connector to  
connect it to your PS/2 port.  
Charging Base  
(Tranceiver)  
27 MHz RF Wireless  
You can choose one of two channels, CH1 and  
CH2. Remove interference by changing the  
channel.  
Rechargeable Optical Mouse  
1. Remove the battery compartment cover on the  
mouse. Slide the CH1/CH2 switch inside the  
compartment to the desired setting. Replace  
the cover.  
AC Adapter  
The tranceiver has two lights “CHARG”  
NOTE  
and “RX,” indicating the state of  
charging and connection.  
2. Press the CONNECT button on the tranceiver.  
3. Press the CONNECT button on the bottom of  
the mouse.  
install the mouse driver  
Your mouse works with Microsoft Windows  
98/2000/ME/XP/NT.  
If you notice any interference, due to  
NOTE  
1. Exit all open Windows applications.  
2. Insert the supplied Install CD into your CD-ROM  
driver.  
3. If you do not have auto-run set on your  
computer, go to My Computer, double-click on  
your CD-ROM drive, and select the setup file.  
4. Follow the on-screen instructions to complete  
the installation.  
the presence of another wireless optical  
mouse, change the channel.  
Bottom view  
of Mouse  
CH1/CH2  
switch  
Two RadioShack NiMH Rechargeable Batteries  
User’s Guide  
PS/2 Connector  
Install CD  
Uninstall your old mouse driver before  
ou install the software for your new  
mouse.  
CONNECT  
button  
NOTE  
If you change your mouse connection  
(i.e.: from USB to PS/2 or vice versa),  
you may have to reinstall the driver and  
reset the mouse’s button functions.  
Charging  
Contacts  
Please read this user’s guide before  
installing, setting up and using your new product  
 

Radio Shack Electronic Keyboard 42 4062 User Guide
Radio Shack Switch 26 199 User Guide
RCA Camcorder EZ200 User Guide
RCA CRT Television F27318 User Guide
RCA Universal Remote CRCU100 User Guide
Renesas Computer Hardware FP 80Q User Guide
Rosewill Sleep Apnea Machine RHMS 13001 User Guide
Rosewill TV Mount RHTB 13001 User Guide
Saeco Coffee Makers Coffeemaker VIENNADELUXE User Guide
Sanyo Battery Charger HR SCC User Guide